Extruded acrylic rods are available in lengths up to 48". Some light extrusion lines may be visible in larger diameters above 1/2".
Please allow +(-) 1/4" tolerance on finish size.
Edges are saw cut. Contact us if you need edge finishing.
- Transparent Clear
- Diameter tolerance +/- 0.03"
- All tubes have saw-cut edges on both ends
Characteristics
Dimensional accuracy and excellent circularity
Superior UV resistance and weather ability
Enhanced chemical resistance due to higher molecular weight
11X stronger than glass for safe, strong installations
Half the weight of glass for maximum design flexibility
Extruded acrylic rods are available in lengths up to 48". Some light extrusion lines may be visible in larger diameters above 1/2".
Please allow +(-) 1/4" tolerance on finish size.
Edges are saw cut. Contact us if you need edge finishing.
- Transparent Clear
- Diameter tolerance +/- 0.03"
- All tubes have saw-cut edges on both ends
Characteristics
Dimensional accuracy and excellent circularity
Superior UV resistance and weather ability
Enhanced chemical resistance due to higher molecular weight
11X stronger than glass for safe, strong installations
Half the weight of glass for maximum design flexibility
We provide a variety of specialized services, including UV printing, laser cutting, laser engraving, drilling, and polishing. These services are available for a fee and can be customized to meet your specific needs.
For more information or to discuss customization options, please feel free to contact us.
- For laser cutting, it's best to mirror your artwork and cut with the backing side facing up (mirrored side facing down) to achieve optimal results.
Recommended Glowforge Setting: Medium Black Acrylic
The provided settings and tips are general guidelines. For optimal results, it's recommended to conduct a small test before proceeding with a larger project.
For cutting:
- Iridescent side up (Blue masking side)
- Keep the protective film in place
- Slightly more power than standard cast acrylic
- Air assist ON
For engraving:
- The opposite side of the iridescent film up (Clear masking side)
- Peel off masking
- Air assist OFF
Recommended Glowforge Setting: Medium Black Acrylic
The provided settings and tips are general guidelines. For optimal results, it's recommended to conduct a small test before proceeding with a larger project.
- Pre-cut sizes are nominal and subject to a +/- 1/4" cutting tolerance.
- Custom cut-to-size or recut sheets are subject to a +/- 1/16" tolerance.
- Thickness may differ by up to 20%.
- Without polishing, edges might be slightly chipped due to the cutting process.
- Product colors on our website may look different depending on your screen settings. While we try to display colors accurately, they may not be an exact match
- Most of our products come with a paper mask ready for laser cutting, and some have a protective plastic film. Although the plastic film is safe for lasers, we recommend replacing it with paper masking for better results. If the sheet has film masking, the option to replace with paper masking will be available in the customization section.