| Thickness | 1/8" (0.118" / 3.0mm) |
| Surface Finish | Glossy |
| Opacity | Opaque |
| Special Finish | None |
| Color Code | #2157 |
| Thickness Tolerance | +/- 10% |
| Masking | Plastic on both sides |
| Acrylic Type | Cast |
| Thickness | 1/8" (0.118" / 3.0mm) |
| Surface Finish | Glossy |
| Opacity | Opaque |
| Special Finish | None |
| Color Code | #2157 |
| Thickness Tolerance | +/- 10% |
| Masking | Plastic on both sides |
| Acrylic Type | Cast |
We provide a variety of specialized services, including UV printing, laser cutting, laser engraving, drilling, and polishing. These services are available for a fee and can be customized to meet your specific needs.
For more information or to discuss customization options, please feel free to contact us.
- For laser cutting, it's best to mirror your artwork and cut with the backing side facing up (mirrored side facing down) to achieve optimal results.
Recommended Glowforge Setting: Medium Black Acrylic
The provided settings and tips are general guidelines. For optimal results, it's recommended to conduct a small test before proceeding with a larger project.
For cutting:
- Iridescent side up (Blue masking side)
- Keep the protective film in place
- Slightly more power than standard cast acrylic
- Air assist ON
For engraving:
- The opposite side of the iridescent film up (Clear masking side)
- Peel off masking
- Air assist OFF
Recommended Glowforge Setting: Medium Black Acrylic
The provided settings and tips are general guidelines. For optimal results, it's recommended to conduct a small test before proceeding with a larger project.
- Pre-cut sizes are nominal and subject to a +/- 1/4" cutting tolerance.
- Custom cut-to-size or recut sheets are subject to a +/- 1/16" tolerance.
- Thickness may differ by up to 20%.
- Without polishing, edges might be slightly chipped due to the cutting process.
- Product colors on our website may look different depending on your screen settings. While we try to display colors accurately, they may not be an exact match
- Most of our products come with a paper mask ready for laser cutting, and some have a protective plastic film. Although the plastic film is safe for lasers, we recommend replacing it with paper masking for better results. If the sheet has film masking, the option to replace with paper masking will be available in the customization section.