| Thickness | 1/8" (0.118" / 3.0mm) |
| Surface Finish | Glossy |
| Opacity | Opaque |
| Special Finish | None |
| Color Code | #5040 |
| Thickness Tolerance | +/- 10% |
| Masking | Paper on both sides |
| Acrylic Type | Cast |
| Thickness | 1/8" (0.118" / 3.0mm) |
| Surface Finish | Glossy |
| Opacity | Opaque |
| Special Finish | None |
| Color Code | #5040 |
| Thickness Tolerance | +/- 10% |
| Masking | Paper on both sides |
| Acrylic Type | Cast |
We provide a variety of specialized services, including UV printing, laser cutting, laser engraving, drilling, and polishing. These services are available for a fee and can be customized to meet your specific needs.
For more information or to discuss customization options, please feel free to contact us.
- For laser cutting, it's best to mirror your artwork and cut with the backing side facing up (mirrored side facing down) to achieve optimal results.
Recommended Glowforge Setting: Medium Black Acrylic
The provided settings and tips are general guidelines. For optimal results, it's recommended to conduct a small test before proceeding with a larger project.
For cutting:
- Iridescent side up (Blue masking side)
- Keep the protective film in place
- Slightly more power than standard cast acrylic
- Air assist ON
For engraving:
- The opposite side of the iridescent film up (Clear masking side)
- Peel off masking
- Air assist OFF
Recommended Glowforge Setting: Medium Black Acrylic
The provided settings and tips are general guidelines. For optimal results, it's recommended to conduct a small test before proceeding with a larger project.
- Sizes of acrylic sheets may vary by +/- 1/4 inch in length and width, and thickness may differ by up to 20%.
- Edges might be slightly chipped due to the cutting process.
- Product colors on our website may look different depending on your screen settings. While we try to display colors accurately, they may not be an exact match
- Most of our products come with a paper mask ready for laser cutting, and some have a protective plastic film. Although the plastic film is safe for lasers, we recommend replacing it with paper masking for better results.